|

Collaboration That Works

ProjectorNet Adapter

Part Number: SP-NETWORK-ADPT-R
SP-NETWORK-ADPT-R
The ProjectorNet Adapter adds Ethernet connectivity to the InFocus IN2100 (and IN3100) projector series via its RS232 port, allowing it to communicate with ProjectorNet 3.0 through the network. The adapter needs no additional mounts and external power supply -- just plug in and connect. Visit the ProjectorNet 3.1. page for more infomation on the capabilities of ProjectorNet projector management software.
  • RoHS compliant
12V Compatible?Yes
ApprovalsRoHS
Data Transfer Rate300 bps to 921,600 bps
Disk Space20 MB hard disk space (full install)
Memory32 MB RAM (64 MB recommended)
Network RequirementsEthernet 10 or 100-Base-TX (Auto-Sensing) RJ-45 TCP/IP, UDP/IP, ARP, ICMP, TFTP, Telnet, DHCP, BOOTP, HTTP and AutoIP; A Network Interface Card (NIC) and access to TCP/IP network; E-mail: SMTP compliant email server to support email notification of projec
Operating System CompatibilityMicrosoft Windows NT (SP5), 2000 (SP3), XP or Vista
ProcessorIntel Pentium II/400 MHz or higher
Resolution (Max)XGA or higher resolution monitor (1024 x 768, 256 color minimum)
Side ADB-9 (female), 12V power (male)
Side BRJ45 (female)
Warranty90 days
Where AvailableWorldwide
Shipping Dimensions HxWxD6in. x 6in. x 6in.
(152.4mm. x 152.4mm. x 152.4mm. )
Shipping Weight1lb. (0.45kg.)