Installing new system firmware in your
ScreenPlay 4805 projector
allows you to keep up to date with new features
and options as they become available.
The projector menu shows the firmware version
currently installed. To see which version is installed
on your projector, press the Menu button on the
keypad. On the Main menu, select About. The current
firmware version appears in the About box. The
original firmware version for the ScreenPlay 4805
was 1.02. If you have this version on your projector,
we suggest that you upgrade now.
NOTE
You can also take your projector to an authorized
service center to have the firmware updated. See
the Support
Contacts page to find the ASC closest to you.
To perform the upgrade from your PC, you'll need
the M1 to VGA/USB cable. Cables can
be purchased from your local reseller or online
in our accessories
store.
The self-extracting file contains firmware installation
instructions.
CAUTION
For a successful upgrade, follow the instructions
carefully. Avoid interrupting the firmware upgrade
once you've started it from your PC. Disrupting
the upgrade process by removing cables or disconnecting
the power before the upgrade completes can damage
the projector. Projector damage caused by disrupted,
incomplete or aborted upgrades is not covered
by warranty. All shipping and repair expenses
for projector service stemming from incomplete
firmware upgrades are at customer expense. |
