Support

Current Version:

Firmware Version 4.3

• Fixed: Sync threshold is not always correct for 720P and 1080i. Sync Threshold Adjust menu control will now adjust sync level for HDTV modes.

Download

CAUTION: For a successful upgrade, follow the instructions carefully. Avoid interrupting the firmware upgrade once you've started it from your PC. Disrupting the upgrade process by removing cables or disconnecting the power before the upgrade completes can damage the projector. Projector damage caused by disrupted, incomplete or aborted upgrades is not covered by warranty. All shipping and repair expenses for projector service stemming from incomplete firmware upgrades are at customer expense.

Firmware Revision History

Version	Date	Notes/Enhancements
v4.3	3-17-2004	Fixed: Sync threshold is not always correct for 720P and 1080i. Sync Threshold Adjust menu control will now adjust sync level for HDTV modes.
v4.2	12-8-2003	Fixed: Overscan gets turned off when resize is changed through the remote resize button. It remains checked in the menu but when you uncheck it there is no change to the image. When you check it again, you can see overscan cropping the image.
v4.1	8-29-2003	Lamp counter now allows 4,000 hours of operation for a single lamp. Prior versions allowed 3,000 hours. Longer life due data collected since the X1 was released. Fixed remote mouse issue. Remote mouse now continues to respond beyond 5 minutes. Sync Slicer control in the Picture menu allows a broader range of use with Progressive DVD players. The default value works for the large percentage of the DVDs and the other option allows those others that have issues to function. The sync Slicer menu option is only available for the computer input. Auto source default setting is "On". Corrected Norwegian translation for volume
v3.8	6-19-2003	Fixed: Corrects image blanking during power down Fixed: Corrects leftward image shift for 720p50, 1080i23, 1080i24, and 1080i25 sources Enhancements: Improves video synchronization with wide variety of source signals
v3.6	N/A	Fixed: The Ceiling and Rear projection modes could not be enabled if the projector had not synchronized with a source signal. Fixed: The image could exhibit occasional instability near the top when the projector was connected to a 480p video source. The instability was most visible when a 4:3 aspect ratio was selected. Enhancements: When the Overscan option is enabled, the projector properly centers video images from NTSC and PAL sources. This also applies to images from 480p video sources. Enhancements: The projector more quickly identifies a broader range of signals in any operating mode.
v2.9	N/A	Updated French, Portuguese, Italian & Norwegian translations Disable debug messages on USB disconnect
v2.7	N/A	Flags removed from the language menu Phone numbers removed from splash screen Enabled support for Overscan button on Director remote
v2.3	N/A	Initial release

Lamps

Back to Top
	Lamp for the X1, X1A, SP4800, and C109 (Part number: SP-LAMP-009) InFocus Certified lamp for the X1, X1A, SP4800, and C109. 4000 hour rated lamp life. View Details

Display
Native Aspect Ratio:	4x3
Supported Aspect Ratio:	16:9, 4:3
Brightness: (max ANSI lumens)	High Bright: 1100 Lumens Eco Mode: Not Available
Contrast Ratio:	2000 : 1 Full On/Full Off
Display Technology:	DLP by Texas Instruments: 0.55" SVGA DDR DMD
Data Compatibility:	SVGA (800x600), XGA (1024x768), VGA (640x480)
Video Compatibility:	1080i, 480i, 576i, 576p, 720p, 480p, Full NTSC, PAL, SECAM
Color Wheel (DLP Only):	4-segment, 2x
Native Resolution:	SVGA
Projector Placement:	Ceiling Projection, Front Projection, Rear Projection
SMPTE Brightness:
Lamp Wattage:	High Bright: 150 Watts Eco Mode: Not Available
Lamp Life:	High Bright: 4000 Hours Eco Mode: Not Available
Minimum Image Size:	2.7 ft (0.82 m)
Maximum Image Size:	21.6 ft (6.58 m)
Standard Lens Zoom:	1.2:1 : 1
Standard Lens Throw Ratio:	1.89 - 2.27 (Distance/Width)
Standard Lens Image Offset Ratio:
Standard Lens Projection Distance:	5 - 32.3 ft (1.52 - 9.85 m)
Digital Keystone Correction (Vertical):	20
Digital Keystone Correction (Horizontal):
Lens Shift:	Not Available
Inputs and Outputs
DVI:	Not Available
M1:	Not Available
HDMI:	Not Available
BNC:	Not Available
Component (RCA):	Not Available
VESA (HD15):	Number of Inputs: 1
S-Video:	Number of Inputs: 1
Composite (RCA):	Number of Inputs: 1
Standard Definition TV:	S-Video, Composite RCA
Enhanced Definition TV:	VGA
High Definition TV:	VGA
Computer:	VGA
HDCP Support:	No
Stereo RCA Jacks Inputs:	No
Stereo 3.5 mm Mini-jack Inputs:	Yes
12v trigger for motorized screens (3.5 mm mini-jack):	No
Projector Control:	Projector Keypad, Remote
Speakers:	2.5 Watt mono speaker
Monitor Output:	Yes
Audio Output:	Audio Input: 3.5mm mini-jack (Computer and Video)
Compatibility
Data Compatibility:	SVGA (800x600), XGA (1024x768), VGA (640x480)
H-Sync Range:	31.5 - 80kHz
V-Sync Range:	50 - 85Hz
Video Compatibility:	1080i, 480i, 576i, 576p, 720p, 480p, Full NTSC, PAL, SECAM
General
Audible Noise:	37 dB
Actual Dimensions:	Height: 15 in (38.1 cm) Length: 19 in (48.26 cm) Width: 15 in (38.1 cm)
Actual Weight:	6.8 lbs (3.08 kg)
Shipping Dimensions:	Height: 15 in (38.1 cm) Length: 19 in (48.26 cm) Width: 15 in (38.1 cm)
Shipping Weight:	14 lbs (6.35 kg)
Projector Warranty:	2 years
Lamp Warranty:	90 days
Accessories Warranty:	90 days
Operating temperature: (at sea level)	41 - 104° F (5 - 40° C)
Maximum Altitude Supported:	10000 ft (3048 m)
Typical Power Consumption:	200 Watts
Maximum Power Consumption:	250 Watts
Power Supply:	100 - 240 Volts at 50 - 60 Hz
Menu Languages:	English, French, German, Italian, Japanese, Korean, Norwegian, Portuguese, Russian, Simplified Chinese, Spanish, Traditional Chinese
Approvals:	UL, c-UL, TUV GS, CE, GOST, C-Tick, NOM, IRAM, FCC B, CISPR22 /EN55022, EN 55024 /